How OpenCode handles this
OpenCode lives in your terminal beside the repository, so the PageSpeed question usually comes up mid-task: did the last change help the live site? Ask it, and it calls get_score_history through the Hub. You get the stored runs back, with score, LCP, FCP, CLS, TBT, Speed Index and TTFB, mobile and desktop. If a metric moved between two runs, it can point to it and suggest which change is the likely cause, though that is a guess you should check.
run_speed_test is the call for a fresh measurement. It is a PageSpeed Insights run from the Hub, mobile or desktop, and can take up to about two minutes, so ask for one device at a time. The Hub saves the result in its own report history, which get_score_history, reading the plugin's stored runs, may not include. When you only need to know if cached pages are doing their job, run_benchmark times the home page cached and uncached and has no Lighthouse score. get_benchmark_history shows the earlier benchmark runs.
OpenCode has a permission setting with ask, allow and deny, but most permissions default to allow, so with no rule of yours a Hub tool runs without a prompt. Add an ask rule for the whole server first, then allow rules for the read tools, so reviews run without interruption and run_speed_test still asks, because it spends the shared speed-test allowance. If a tool must never run from the terminal, deny is available too, and it holds even under the auto flag.
Set up OpenCode once
Already connected? Skip to the prompts. Alternatives and troubleshooting are on the OpenCode guide.
1Put your sites in xSpeed Hub
Sign in at app.xspeedcache.com with Google or email; the Hub is free and has no site cap. Then connect each WordPress site from its own dashboard: click Connect Hub in the xSpeed Cache top bar, then Connect via xSpeed Hub. Each site needs the free xSpeed Cache plugin.
2Add xSpeed Hub to your config
Put this block in your global config, or in opencode.json at a project root to scope it to that project. OpenCode reads both JSON and JSONC. No other field is needed: when the Hub answers 401, OpenCode starts the OAuth flow and registers itself through dynamic client registration.
{
"$schema": "https://opencode.ai/config.json",
"mcp": {
"xspeedhub": {
"type": "remote",
"url": "https://app.xspeedcache.com/xspeed/mcp"
}
}
} 3Sign in with opencode mcp auth
Run this once. It opens a browser page on xSpeed Hub where you sign in and approve access. There is no token to paste; OpenCode stores the credentials it receives. Run opencode mcp list to see the server and its auth status, and opencode mcp debug xspeedhub if the connection fails.
opencode mcp auth xspeedhub
Full OpenCode setup, sign-in options and FAQ
Before you send a prompt that changes something
Reads change nothing on your sites, though contact_support emails xSpeed support. Writes run once your connection allows them, so your client's approval prompt and a read-only connection (the token's Read-only everywhere switch, or a Viewer sign-in) are the gates that matter. OpenCode checks MCP tools against its permission rules under the prefixed name, such as xspeedhub_purge_cache, and most permissions default to allow. With no rule of yours in place, a Hub write tool runs without a prompt. Add rules to change that: "xspeedhub_*": "ask" first, then "xspeedhub_get_*": "allow" and "xspeedhub_list_*": "allow", because the last matching rule wins. A deny rule holds even under opencode --auto, which approves everything that is not denied. The Hub itself has no confirmation step, so these rules and read-only access are the gates. For read-only access, send the connection token with Read-only everywhere on, or sign in as a Viewer member.
What do I ask?
Three prompts written for OpenCode. More for this job are below.
Using xSpeed Hub, what are the latest mobile and desktop scores on shop, and how old are they?
Use xSpeed Hub to run one mobile test on blog and tell me what moved against the previous mobile run.
With xSpeed Hub, check the benchmark history on shop and say if cached response time improved after the settings change I made on Monday.
What happens, step by step
PageSpeed Insights is Google's Lighthouse audit, and its score and Core Web Vitals are the numbers most people mean by "my speed". Through xSpeed Hub an agent can read the scores a site has already stored, run a new PageSpeed test on mobile or desktop, and read or run a separate benchmark of cached against uncached response time. The three answer different questions, and the Hub tells the agent which to use for each.
01
Read before you test
get_score_history returns the stored PageSpeed Insights and GTmetrix runs for a site: the score per run, with LCP, FCP, CLS, TBT, Speed Index and TTFB, mobile and desktop. It starts nothing. The Hub tells the agent to use it whenever you ask what your score is, or whether it improved, because a new test spends a shared allowance.
02
Run a new test when you need one
run_speed_test runs a real PageSpeed Insights audit on the site from the Hub and returns the score, the Core Web Vitals and the top opportunities. strategy is mobile (the default) or desktop, and one call tests one of them. It can take up to about 2 minutes, so the agent should say it is running before it calls.
03
Test the other device
Mobile and desktop scores differ, often by a lot. For both, the agent makes two calls, one per strategy. A failure is reported with its reason: PageSpeed not configured, quota reached, a timeout, or a site the audit cannot reach.
04
Measure the cache on its own
run_benchmark times the home page with the cache bypassed and again served from cache, and returns the response times. It is a read tool, and it accepts site: "all" for every site. It does not return a Lighthouse score, so the agent must not use it to answer a PageSpeed question.
05
Compare over time
get_benchmark_history returns past benchmark runs, uncached against cached, together with the settings changes on the same timeline, which is how you answer "did that change help?". For PageSpeed scores over time, use get_score_history.
Reference
| Read stored scores | get_score_history (read): PageSpeed Insights and GTmetrix runs, starts nothing |
|---|---|
| Metrics per run | Score, LCP, FCP, CLS, TBT, Speed Index, TTFB, for mobile and desktop |
| Run a new test | run_speed_test (write, uses the shared allowance): one PageSpeed Insights run per call |
| strategy | mobile (default) or desktop |
| Duration | Up to about 2 minutes per run |
| Why a test is a write | It spends a shared PageSpeed allowance and stores a report; it changes nothing on the site |
| Read-only access | A connection token with Read-only everywhere on, or a Viewer member's sign-in: run_speed_test is refused; get_score_history, run_benchmark and get_benchmark_history still work. An OAuth sign-in gets the scopes the client asks for |
| Benchmark | run_benchmark (read): cached against uncached response time for the home page, no Lighthouse score |
| Benchmark history | get_benchmark_history (read): past runs plus settings changes on the same timeline |
| Scheduling | The Hub does not schedule PageSpeed tests itself; its daily pass only reads reports the plugin already stored |
| Where a new test is stored | In the Hub's own report history, the one the Hub dashboard shows |
Rules worth keeping
- Check the history first. Ask for stored scores before starting a test, and run a new one only when you want a fresh measurement or something changed.
- Never answer a PageSpeed or Lighthouse question with run_benchmark. It times your own cache and carries no score.
- run_speed_test changes nothing on your site, but the Hub classes it a write because it spends a shared allowance. A connection token with Read-only everywhere on, or a Viewer sign-in, refuses it. An OAuth sign-in gets the scopes the client asks for, so there your client's approval prompt is the gate.
- Lab scores move a few points between runs of the same page. The agent should compare like with like, same site, same strategy, and not report one run's difference as a trend.
- A new test does not run on a timer. If you want a regular test, the agent has to be started by something else, such as a scheduled job in your client, and a scheduled run that spends the allowance should be one you are comfortable leaving unattended.
Good to know with OpenCode
OpenCode checks MCP tools under the prefixed name, such as xspeedhub_run_speed_test, and the last matching rule wins. Write the catch-all first, xspeedhub_* set to ask, then xspeedhub_get_* set to allow. Reverse the order and the catch-all overrides your allow rule. run_benchmark does not start with get_, so it stays on ask unless you give it its own allow rule. With no rule at all, run_speed_test runs without asking.
More prompts for this job
They work in any client connected to xSpeed Hub.
Using xSpeed Hub, what is the mobile PageSpeed score for shop? Check the stored history before you run anything.
Use xSpeed Hub to run a new mobile PageSpeed test on blog and tell me the score, LCP and the top opportunities.
With xSpeed Hub, test shop on desktop and mobile and tell me which one is worse.
Using xSpeed Hub, has the PageSpeed score on docs improved over the last few runs?
Use xSpeed Hub to benchmark the cache on every site and tell me which one saves the least time.
Did turning on minification on shop help? Use xSpeed Hub to compare the benchmark history around that change.
My PageSpeed test failed on staging. Use xSpeed Hub to tell me why.
Frequently asked questions
Keep going
Track PageSpeed scores with other agents
More with OpenCode
Documentation
- How to run a speed test
- PageSpeed Insights integration
- Running speed tests in xSpeed Hub
- How to run a PageSpeed audit
- How to write prompts for xSpeed Hub
- OpenCode + xSpeed
- Every AI agent that works with xSpeed
From the blog
- Reading a PageSpeed Report in 2026: 30% of the Score Is a Metric Google Does Not Rank You On
- 45% of the WordPress Sites Our Scan Calls Clean Are Failing Google in 2026: Lab Scores Against Field Data
- The Same Page Scored 61 and 73 Twelve Minutes Apart: How to Benchmark WordPress Caching Plugins in 2026