How NanoClaw handles this
You are in the Slack channel where your NanoClaw agent listens, and blog has just moved to a hosting plan with Redis. You message the agent with its trigger word: set up Redis on blog, test first. The agent calls get_object_cache_status through xSpeed Hub, which reports whether the object-cache.php drop-in is installed, which backend is configured and its stats, then test_object_cache, which makes the site connect to Redis and write and read a probe value. The status alone never proves Redis answers, so the test always comes second.
What comes back is a short report in the channel and a question. When the probe passes, the agent proposes toggle_object_cache with enabled set to true, and the Hub tells the agent to briefly confirm intent for the object-cache toggles, so it asks in the thread. After your yes it enables, which installs the drop-in and writes the connection constants into wp-config.php, and then reads the status again. If the probe fails, the server's own error comes back, such as a wrong password or a refused connection, and the fix is on the host. The site would refuse to enable anyway, stopping with Could not enable.
What differs in NanoClaw is that the agent and its rules are yours. It runs in a container on your machine, the Hub is one server on one agent group, and whether it prompts before an MCP tool depends on your fork. The Hub has no confirmation step of its own, so the firm stop is the connection token the group sends: with Read-only everywhere on, the status and the test still work and the Hub refuses the toggle and the flush. Scheduled tasks suit the follow-up, such as a weekly test posted to the channel.
Set up NanoClaw once
Already connected? Skip to the prompts. Alternatives and troubleshooting are on the NanoClaw guide.
1Put your sites in xSpeed Hub
Sign in at app.xspeedcache.com with Google or email; the Hub is free and has no site cap. Then connect each WordPress site from its own dashboard: click Connect Hub in the xSpeed Cache top bar, then Connect via xSpeed Hub. Each site needs the free xSpeed Cache plugin.
2Add xSpeed Hub to your agent group
Copy the connection token from Connect AI in the Hub (only the workspace owner sees it). Then run this on the machine that hosts NanoClaw, with your agent group's ID from ncl groups list. The header goes in as a JSON object, because NanoClaw refuses credentials inside the URL. NanoClaw may ask an admin to approve the change.
ncl groups config add-mcp-server --id <group-id> --name xspeedhub \
--url https://app.xspeedcache.com/xspeed/mcp \
--headers '{"Authorization":"Bearer <your connection token>"}' 3Restart the group and ask
The new server takes effect after a restart. Then message your agent with its trigger word, @Andy by default, and ask something that names xSpeed Hub.
ncl groups restart --id <group-id>
Full NanoClaw setup, sign-in options and FAQ
Before you send a prompt that changes something
Reads change nothing on your sites, though contact_support emails xSpeed support. Writes run once your connection allows them, so your client's approval prompt and a read-only connection (the token's Read-only everywhere switch, or a Viewer sign-in) are the gates that matter. Whether NanoClaw asks you before an MCP tool runs depends on how your fork and its admins are set up; its documentation gates adding a server behind approval but describes no per-tool prompt for calls. xSpeed Hub has no confirmation step of its own, so a write runs as soon as the agent calls it and your connection allows writes. The Hub tells the agent to confirm the target site and to ask once before a write that touches every site, which in NanoClaw shows up as a question in the chat. The firm stop is the token: with Read-only everywhere on, the Hub refuses every write tool. Keep it on for scheduled tasks.
What do I ask?
Three prompts written for NanoClaw. More for this job are below.
@Andy use xSpeed Hub to set up Redis on blog. Test first and ask me before you enable.
@Andy with xSpeed Hub, check the object cache status on shop and tell me if it is degraded.
@Andy use xSpeed Hub to flush the object cache on blog, asking me first. Old options survived a purge.
What happens, step by step
A persistent object cache keeps database query results in Redis or Memcached instead of rebuilding them on every request. Through xSpeed Hub an agent can read the state of the cache, probe the cache server, switch the cache on or off, and flush it. The Hub tells the agent to run the probe first, because the status call alone does not prove the server is reachable.
01
Read the current state
get_object_cache_status reports whether the object-cache.php drop-in is installed, which backend is configured, Redis or Memcached, and its stats. It does not prove the server answers, so a clean status is not a green light.
02
Test the connection first
test_object_cache opens a live connection to the configured server and does a read and write probe with the settings saved on the site. A failure comes back with the server's own reason, such as a wrong password, a refused connection or a permission error. The Hub tells the agent to run this before toggle_object_cache.
03
Fix the connection if the test fails
get_settings reads the object-cache module, with secrets masked. update_settings changes it, for example the host or port. On a managed host that defines these values in wp-config.php, the fields are read-only and a write that tries to change one is refused with the name of the constant. For a host that wants the constants pasted, get_object_cache_status with detail set to snippet returns the wp-config.php block.
04
Turn it on
toggle_object_cache with enabled true makes the site test the connection again, write the connection constants into wp-config.php and install the object-cache.php drop-in. If the test fails, it stops with "Could not enable" and writes nothing. If wp-config.php is not writable, the drop-in goes in and the reply tells you to add the snippet by hand. The Hub tells the agent to briefly confirm intent first.
05
Check it took
The drop-in loads on the next request, so the agent reads get_object_cache_status again after a page load and runs test_object_cache once more. The status also warns when the cache connects but refuses writes, so a connected cache that stores nothing does not pass as healthy.
06
Flush when stale data survives
flush_object_cache empties the persistent object cache. Use it when old options, transients or query results outlive a page cache purge. It does not touch the page cache; purge_cache does that.
Reference
| Read tools | get_object_cache_status and test_object_cache, both work on a read-only connection |
|---|---|
| Write tools | toggle_object_cache (enabled true or false) and flush_object_cache |
| Backends | Redis or Memcached |
| Status detail | status (default) or snippet, the wp-config.php constants block |
| What status proves | Drop-in installed, backend configured, stats. Not that the server is reachable |
| What the test proves | A live connect and a read and write probe on the saved settings, with the server's own error on failure |
| Enable does | Tests the connection, writes connection constants to wp-config.php, installs the object-cache.php drop-in |
| Disable does | Removes xSpeed's drop-in and its wp-config.php block; a drop-in owned by another plugin is left alone |
| Connection timeout | 1 second by default, set in the object-cache module |
| Settings module | object-cache, for get_settings and update_settings |
| Every site at once | None of these tools accept site: "all"; one site per call |
| Confirmation | None on the Hub; your client's prompt is the gate |
Rules worth keeping
- Test before you toggle. The Hub tells the agent to run test_object_cache first, because a cache server that does not answer slows every request while the page cache still looks healthy.
- Keep the Redis password out of the chat. get_settings masks it, but the wp-config.php snippet is built from the saved settings and can include a saved password. Set secrets in wp-config.php or in the xSpeed panel.
- toggle_object_cache and flush_object_cache are write tools. The Hub tells the agent to briefly confirm intent for the object-cache toggles, but that is guidance, not a lock. Your client's approval prompt and a read-only grant are the gates that matter. A read-only grant means the connection token with Read-only everywhere on, or a Viewer member's sign-in; an OAuth sign-in gets the scopes the client asks for, which are read and write by default.
- If another plugin owns the object-cache.php drop-in, turn its object cache off in that plugin. xSpeed leaves a drop-in it did not install in place when you disable.
- A flush clears cached data, so the next requests rebuild it from the database and the site is briefly slower. Flush one site, then check it, before you repeat it.
Good to know with NanoClaw
A scheduled task created with ncl tasks create has no chat attached, so the prompt must name where to send the result, and nobody is there to answer a question about a write. Keep it to get_object_cache_status and test_object_cache, and send it through a group whose token has Read-only everywhere on. The token lives in the group's container configuration on your host, so protect that machine and its backups. Do not ask for the wp-config.php snippet in a shared channel, because it can include a saved password.
More prompts for this job
They work in any client connected to xSpeed Hub.
Using xSpeed Hub, is a persistent object cache running on shop, and which backend does it use?
Use xSpeed Hub to test whether Redis is reachable from shop. Do not change anything.
Shop is slow in wp-admin. Use xSpeed Hub to check the object cache before anything else.
With xSpeed Hub, test Redis on shop, and if it passes, turn the object cache on.
Ask xSpeed Hub for the wp-config.php object cache snippet for docs.
Use xSpeed Hub to flush the object cache on blog. Old options survive a page cache purge.
With xSpeed Hub, turn the object cache off on shop and confirm the drop-in is gone.
Frequently asked questions
Keep going
Set up Redis object cache with other agents
More with NanoClaw
Documentation
- How to enable Redis or Memcached
- How to enable Page Cache
- Common problems and troubleshooting
- How to write prompts for xSpeed Hub
- NanoClaw + xSpeed
- Every AI agent that works with xSpeed
From the blog