How Muse handles this
You are away from your desk and a customer says checkout on shop felt slow this morning. You message Muse in WhatsApp, ask whether the object cache is working, and add that nothing should change. Muse calls get_object_cache_status through the xSpeed Hub connector, which reports whether the object-cache.php drop-in is installed, which backend is configured and whether the connection is degraded, then test_object_cache, which makes the site connect to Redis and write and read a probe value.
What comes back fits a phone screen: the drop-in is installed, but Redis refuses the connection, so the site has fallen back to WordPress's own cache. It still works, yet each request can wait up to the one second connection timeout. A refused connection usually means the Redis service stopped, which is a hosting task, so the useful next step is a message to your host, not a toggle. When the host has restarted it, ask Muse to run the test again. If you are setting Redis up for the first time instead, the order is the same: status, then test, and toggle_object_cache with enabled set to true only after a pass.
What differs in Muse is where the stop sits. Meta says Muse will not take many important actions without your approval by default, that you change when it asks in Settings, and that its Sentinel agent decides what leaves its secure machine. xSpeed Hub has no confirmation step of its own. The firm stop is the connection token Muse keeps in its Secure Credentials Store: with Read-only everywhere on, the status and the test still work and the Hub refuses toggle_object_cache and flush_object_cache. That suits checks from a phone.
Set up Muse once
Already connected? Skip to the prompts. Alternatives and troubleshooting are on the Muse guide.
1Put your sites in xSpeed Hub
Sign in at app.xspeedcache.com with Google or email; the Hub is free and has no site cap. Then connect each WordPress site from its own dashboard: click Connect Hub in the xSpeed Cache top bar, then Connect via xSpeed Hub. Each site needs the free xSpeed Cache plugin.
2Copy the connection token from xSpeed Hub
Sign in at app.xspeedcache.com as the workspace owner and open Connect AI. Copy the connection token. For a first try, turn on Read-only everywhere: the Hub then refuses every write tool on that token, so Muse can read but not purge or change settings.
xSpeed Hub > Connect AI > connection token (Read-only everywhere: on)
3Ask Muse to create a custom connector
Send this message to Muse in the app, on muse.ai or in WhatsApp, and follow the steps Muse gives you. When it asks for the credential, give it the token as a Bearer token. Meta does not review custom connectors, so only finish this for the request you started yourself.
Create a custom connector called xSpeed Hub for the MCP server at https://app.xspeedcache.com/xspeed/mcp It authenticates with a Bearer token in the Authorization header. Once it is connected, use xSpeed Hub to list my sites.
Full Muse setup, sign-in options and FAQ
Before you send a prompt that changes something
Reads change nothing on your sites, though contact_support emails xSpeed support. Writes run once your connection allows them, so your client's approval prompt and a read-only connection (the token's Read-only everywhere switch, or a Viewer sign-in) are the gates that matter. Meta says Muse will not take many important actions without your approval by default, that many connectors can be set up to only retrieve data, and that you change when Muse asks for approval in its Settings. Muse's separate Sentinel agent also decides what leaves its secure machine and asks you for permission when needed. xSpeed Hub has no confirmation step of its own, so a write runs as soon as Muse calls it and your connection allows writes. The firm stop here is the token: with Read-only everywhere on, the Hub refuses every write tool, whatever Muse decides. Turn it off only when you want Muse to purge or change settings, and read each question Muse asks before you answer yes.
What do I ask?
Three prompts written for Muse. More for this job are below.
With xSpeed Hub, is the object cache working on shop? Test Redis and do not change anything.
Use xSpeed Hub to test Redis on shop again; my host says they restarted it.
Ask xSpeed Hub for the object cache status on blog, in two short lines.
What happens, step by step
A persistent object cache keeps database query results in Redis or Memcached instead of rebuilding them on every request. Through xSpeed Hub an agent can read the state of the cache, probe the cache server, switch the cache on or off, and flush it. The Hub tells the agent to run the probe first, because the status call alone does not prove the server is reachable.
01
Read the current state
get_object_cache_status reports whether the object-cache.php drop-in is installed, which backend is configured, Redis or Memcached, and its stats. It does not prove the server answers, so a clean status is not a green light.
02
Test the connection first
test_object_cache opens a live connection to the configured server and does a read and write probe with the settings saved on the site. A failure comes back with the server's own reason, such as a wrong password, a refused connection or a permission error. The Hub tells the agent to run this before toggle_object_cache.
03
Fix the connection if the test fails
get_settings reads the object-cache module, with secrets masked. update_settings changes it, for example the host or port. On a managed host that defines these values in wp-config.php, the fields are read-only and a write that tries to change one is refused with the name of the constant. For a host that wants the constants pasted, get_object_cache_status with detail set to snippet returns the wp-config.php block.
04
Turn it on
toggle_object_cache with enabled true makes the site test the connection again, write the connection constants into wp-config.php and install the object-cache.php drop-in. If the test fails, it stops with "Could not enable" and writes nothing. If wp-config.php is not writable, the drop-in goes in and the reply tells you to add the snippet by hand. The Hub tells the agent to briefly confirm intent first.
05
Check it took
The drop-in loads on the next request, so the agent reads get_object_cache_status again after a page load and runs test_object_cache once more. The status also warns when the cache connects but refuses writes, so a connected cache that stores nothing does not pass as healthy.
06
Flush when stale data survives
flush_object_cache empties the persistent object cache. Use it when old options, transients or query results outlive a page cache purge. It does not touch the page cache; purge_cache does that.
Reference
| Read tools | get_object_cache_status and test_object_cache, both work on a read-only connection |
|---|---|
| Write tools | toggle_object_cache (enabled true or false) and flush_object_cache |
| Backends | Redis or Memcached |
| Status detail | status (default) or snippet, the wp-config.php constants block |
| What status proves | Drop-in installed, backend configured, stats. Not that the server is reachable |
| What the test proves | A live connect and a read and write probe on the saved settings, with the server's own error on failure |
| Enable does | Tests the connection, writes connection constants to wp-config.php, installs the object-cache.php drop-in |
| Disable does | Removes xSpeed's drop-in and its wp-config.php block; a drop-in owned by another plugin is left alone |
| Connection timeout | 1 second by default, set in the object-cache module |
| Settings module | object-cache, for get_settings and update_settings |
| Every site at once | None of these tools accept site: "all"; one site per call |
| Confirmation | None on the Hub; your client's prompt is the gate |
Rules worth keeping
- Test before you toggle. The Hub tells the agent to run test_object_cache first, because a cache server that does not answer slows every request while the page cache still looks healthy.
- Keep the Redis password out of the chat. get_settings masks it, but the wp-config.php snippet is built from the saved settings and can include a saved password. Set secrets in wp-config.php or in the xSpeed panel.
- toggle_object_cache and flush_object_cache are write tools. The Hub tells the agent to briefly confirm intent for the object-cache toggles, but that is guidance, not a lock. Your client's approval prompt and a read-only grant are the gates that matter. A read-only grant means the connection token with Read-only everywhere on, or a Viewer member's sign-in; an OAuth sign-in gets the scopes the client asks for, which are read and write by default.
- If another plugin owns the object-cache.php drop-in, turn its object cache off in that plugin. xSpeed leaves a drop-in it did not install in place when you disable.
- A flush clears cached data, so the next requests rebuild it from the database and the site is briefly slower. Flush one site, then check it, before you repeat it.
Good to know with Muse
Do not ask Muse for the wp-config.php snippet. It is built from the saved settings and can contain the Redis password, and Meta notes that what Muse has used may stay in its memories and your conversation history even after you disconnect the connector. Turn Read-only everywhere off only when you want Muse to enable or flush, and back on afterwards, because the token serves every client that sends it. Meta does not review custom connectors, and Muse is rolling out in the US first.
More prompts for this job
They work in any client connected to xSpeed Hub.
Using xSpeed Hub, is a persistent object cache running on shop, and which backend does it use?
Use xSpeed Hub to test whether Redis is reachable from shop. Do not change anything.
Shop is slow in wp-admin. Use xSpeed Hub to check the object cache before anything else.
With xSpeed Hub, test Redis on shop, and if it passes, turn the object cache on.
Ask xSpeed Hub for the wp-config.php object cache snippet for docs.
Use xSpeed Hub to flush the object cache on blog. Old options survive a page cache purge.
With xSpeed Hub, turn the object cache off on shop and confirm the drop-in is gone.
Frequently asked questions
Keep going
Set up Redis object cache with other agents
More with Muse
Documentation
- How to enable Redis or Memcached
- How to enable Page Cache
- Common problems and troubleshooting
- How to write prompts for xSpeed Hub
- Muse + xSpeed
- Every AI agent that works with xSpeed
From the blog