How Grok Build handles this
On a LiteSpeed server the dashboard's hit ratio can look low even though pages are served fast. You ask Grok Build in the terminal: the hit ratio on shop is 14%, is caching broken? It reads get_cache_status, which includes the detected web server, then runs run_benchmark, and it can add get_health if the numbers warrant it.
The two numbers answer different questions. LiteSpeed has a static fast path in which hits never reach anything xSpeed can read, so the dashboard labels the figure as PHP-served only. The benchmark shows the cached request as a hit, at a fraction of the uncached time. Grok Build reports both: caching works, and the ratio counts only what reaches PHP. Whether you keep that trade is your choice. Grok Build asks whether the static fast path is on for the site, because the answer settles it.
Grok Build is a terminal agent, so it can also request the page and read the X-XSpeed-Cache header for you. Use a plain GET, since a HEAD request reports BYPASS on a healthy site. Grok Build starts in Ask mode, which prompts for anything a rule has not allowed, and a rule such as MCPTool(xspeedhub__get_*) lets the reads through. run_benchmark and contact_support do not start with get_, so they still prompt. If the ratio matters to you, ask for the number with its caveat attached, for example: 14%, PHP-served only, with the benchmark showing a hit. A bare figure gets quoted in a ticket or a chat message without its context, and then someone spends an afternoon looking for a fault that was never there.
Set up Grok Build once
Already connected? Skip to the prompts. Alternatives and troubleshooting are on the Grok Build guide.
1Put your sites in xSpeed Hub
Sign in at app.xspeedcache.com with Google or email; the Hub is free and has no site cap. Then connect each WordPress site from its own dashboard: click Connect Hub in the xSpeed Cache top bar, then Connect via xSpeed Hub. Each site needs the free xSpeed Cache plugin.
2Add xSpeed Hub with grok mcp add
Run this once. Add --scope project to write the server to .grok/config.toml in the current directory instead of your user config, which is only sensible if the repo never holds a token. Grok Build handles the OAuth flow for a remote server on its own.
grok mcp add --transport http xspeedhub https://app.xspeedcache.com/xspeed/mcp
3Sign in from the TUI
Start grok and open /mcps. Select xspeedhub and press i to authenticate, or just use a Hub tool and let the browser flow start on first use. Sign in to xSpeed Hub and approve access. There is no token to paste; Grok Build stores the credentials it receives in ~/.grok/mcp_credentials.json. If the connection fails, run grok mcp doctor xspeedhub.
/mcps
Full Grok Build setup, sign-in options and FAQ
Before you send a prompt that changes something
Reads change nothing on your sites, though contact_support emails xSpeed support. Writes run once your connection allows them, so your client's approval prompt and a read-only connection (the token's Read-only everywhere switch, or a Viewer sign-in) are the gates that matter. Grok Build starts in Ask mode, which prompts for anything a rule has not already allowed, so a Hub write tool prompts until you say otherwise. You can allow the reads with a rule such as MCPTool(xspeedhub__get_*) in the permission section of your config, and leave the writes unmatched. Evaluation runs deny, then ask, then allow. Two other modes remove the prompt: Always-approve, from /always-approve, Ctrl+O or --always-approve, approves tool calls unless a deny rule or a hook stops them, and Auto lets a classifier approve tools it judges safe. If a Hub write must never run unprompted, add a deny rule. The Hub itself has no confirmation step.
What do I ask?
Three prompts written for Grok Build. More for this job are below.
The hit ratio on shop is 14% and we run LiteSpeed. Use xSpeed Hub to check the status and run the benchmark, then tell me whether caching is broken.
Alongside xSpeed Hub's numbers, request the shop home page twice with a plain GET and show me the X-XSpeed-Cache header each time.
With xSpeed Hub, read get_cache_status for every site and list the web server it detected for each.
What happens, step by step
When a WordPress page is not served from cache, the cause is usually one of a few things: caching is off, the cache drop-in or the WP_CACHE constant is missing, another caching plugin is in the way, or the pages carry something that makes them uncacheable. Through xSpeed Hub an agent can read the cache status, run the site's full health diagnostics, time a cached request against an uncached one, and check which Pro features would help, all without changing anything.
01
Start with the quick summary
get_cache_status returns whether page caching is on, the stats (cached pages, size, hit ratio, last purge) and the web server xSpeed detected. It is a glance. If caching is off, or the hit ratio is far below what you expect, the agent moves on to the diagnostic.
02
Run the diagnostic
get_health is the tool for troubleshooting. It returns the environment checks with pass or warn tones (the advanced-cache.php drop-in, the WP_CACHE constant, rewrite rules, PHP and WordPress versions, caching plugin conflicts), the cache stats, 24 hourly hit and miss buckets and a 30-day hit-ratio series. The Hub tells the agent to use it, not get_cache_status, when you are troubleshooting rather than glancing.
03
Time cached against uncached
run_benchmark requests the home page once with the cache bypassed and once normally, after a warm-up request, and returns the timings. If the second request still is not a cache hit, the page cache is not serving the home page, and the result says so. It measures xSpeed's own response time. It does not return a Lighthouse score.
04
Read what the checks mean
A warn is a lead, not always a fault. A static-file rewrite warning, for example, can mean the nginx snippet is not in your server config yet, or that xSpeed could not verify it, which is not evidence the config is wrong. The agent reads the detail line and tells you which one it is.
05
Fix it or hand it over
If caching is simply off, toggle_cache turns it on. If another caching plugin owns the drop-in, the site refuses to enable xSpeed and says why; removing the other plugin is yours to do. If nothing explains it, contact_support emails xSpeed support with the agent's summary, after the agent has confirmed the message with you.
Reference
| Quick check | get_cache_status (read): cache on or off, stats, detected web server |
|---|---|
| Diagnostic | get_health (read): environment checks, 24 hourly buckets, 30-day hit-ratio series, recent activity |
| One site per call | get_health does not accept site: "all"; call it for each site you care about |
| Benchmark | run_benchmark (read): home page only, cache bypassed against cache served, timings in milliseconds |
| Benchmark on every site | run_benchmark accepts site: "all" or a list of handles, one result per site |
| Benchmark history | get_benchmark_history reads past runs and the settings changes on the same timeline |
| Pro suggestions | get_pro_audit (read): which Pro features would help this site, from its settings and stats |
| Hit ratio scope | Counts requests that reach your server; pages answered by a CDN or Cloudflare edge are not counted |
| Support | contact_support emails xSpeed support with your account email and site list attached; classed read |
| Turning caching on | toggle_cache (write); refused by the site when another plugin owns the cache drop-in |
Rules worth keeping
- Diagnose with the read tools first. get_cache_status, get_health, run_benchmark and get_pro_audit change nothing on the site, so a read-only connection can run all of them. For clients that send the connection token, that means Read-only everywhere on; an OAuth sign-in gets the scopes the client asks for, unless the member is a Viewer.
- Do not answer a PageSpeed question with run_benchmark. It measures cached against uncached response time and returns no Lighthouse score; for a score, use the speed test or scan jobs.
- toggle_cache is a write. It runs as soon as your connection allows writes, and the Hub tells the agent to confirm the target site first. That is guidance to the agent, so your client's approval prompt is the gate that matters.
- contact_support sends a real email. The Hub tells the agent to confirm the message with you before sending, but the tool is classed read, so even a read-only connection can send one.
- The agent cannot edit your server configuration or another plugin's settings. When a check needs an nginx snippet or a conflicting plugin removed, it tells you what to do and you do it.
Good to know with Grok Build
On a LiteSpeed host, trust the benchmark for whether pages are cached and the ratio for what reaches PHP. An agent that reads only the ratio will call a healthy site broken, so ask Grok Build to quote both. And remember that xSpeed Hub has no confirmation step of its own. Always-approve and Auto mode remove the prompt, so add a deny rule for contact_support if it must never run unprompted; deny rules still apply in Always-approve. Keep to the read tools while you investigate, or use the connection token with Read-only everywhere on, or a Viewer sign-in.
More prompts for this job
They work in any client connected to xSpeed Hub.
Using xSpeed Hub, why is the cache hit ratio so low on shop? Run the full health check and tell me the most likely cause.
Using xSpeed Hub, is page caching actually working on blog? Benchmark cached against uncached and tell me if the second request was a hit.
xSpeed Hub's get_health on docs shows a warning about the static-file rewrite. What does it mean and do I need to act?
Use xSpeed Hub to check whether another caching plugin is conflicting with xSpeed on shop.
Caching looks off on the staging site. Use xSpeed Hub to turn it on and tell me if the site refuses.
Using xSpeed Hub, which Pro features would help the shop site, based on how it is set up now?
With xSpeed Hub, compare the last few benchmark runs on blog and tell me whether my settings changes helped.
Frequently asked questions
Keep going
Find out why pages are not cached with other agents
More with Grok Build
Documentation
- How to read your cache diagnostics
- Understanding cache hits and misses
- How to check your site health
- Common problems and troubleshooting
- How to enable Page Cache
- How to write prompts for xSpeed Hub
- Grok Build + xSpeed
- Every AI agent that works with xSpeed
From the blog