# Set up the Redis object cache with OpenCode

> Setting up a Redis object cache with OpenCode means asking it in your terminal to check a site's object cache, test the Redis connection and enable it through xSpeed Hub.

Page: https://xspeedcache.com/agent/opencode/object-cache/
Last updated: October 2026

You are in an OpenCode session in a terminal, with a WordPress site in mind that is slow on database-heavy pages. Type: list my sites, then set up Redis for shop and test first. OpenCode calls list_sites to match the name to a handle, then get_object_cache_status through xSpeed Hub, which reports whether the object-cache.php drop-in is installed, which backend is configured and its stats. It does not prove Redis answers.

So test_object_cache comes next. The site's plugin opens a live connection to Redis and reads and writes a probe value, and a failure returns the server's own error. Only after a pass should OpenCode call toggle_object_cache with enabled set to true, which installs the drop-in. If the test fails, keep the drop-in off, fix the host side and test again. The site would also refuse with Could not enable, since it tests the connection itself when you enable.

OpenCode is a terminal agent with a shell, so in a session on the server it can also look at the Redis service with ordinary commands, or run redis-cli ping. Treat that as a hint and let test_object_cache decide, since it uses the settings the plugin itself uses. What sets OpenCode apart is its permission model: most permissions default to allow, so with no rule of yours toggle_object_cache runs without a prompt and the only pause is the agent asking you in the chat. Hub tools are registered as xspeedhub_ followed by the tool name, and the last matching rule wins.

## Set up OpenCode once

### 1. Put your sites in xSpeed Hub

Sign in at app.xspeedcache.com with Google or email; the Hub is free and has no site cap. Then connect each WordPress site from its own dashboard: click Connect Hub in the xSpeed Cache top bar, then Connect via xSpeed Hub. Each site needs the free xSpeed Cache plugin.

### 2. Add xSpeed Hub to your config

Put this block in your global config, or in opencode.json at a project root to scope it to that project. OpenCode reads both JSON and JSONC. No other field is needed: when the Hub answers 401, OpenCode starts the OAuth flow and registers itself through dynamic client registration.

File: `~/.config/opencode/opencode.json`

```jsonc
{
  "$schema": "https://opencode.ai/config.json",
  "mcp": {
    "xspeedhub": {
      "type": "remote",
      "url": "https://app.xspeedcache.com/xspeed/mcp"
    }
  }
}
```

### 3. Sign in with opencode mcp auth

Run this once. It opens a browser page on xSpeed Hub where you sign in and approve access. There is no token to paste; OpenCode stores the credentials it receives. Run opencode mcp list to see the server and its auth status, and opencode mcp debug xspeedhub if the connection fails.

```bash
opencode mcp auth xspeedhub
```

Full setup: https://xspeedcache.com/agent/opencode/

### Before you send a prompt that changes something

Reads change nothing on your sites, though contact_support emails xSpeed support. Writes run once your connection allows them, so your client's approval prompt and a read-only connection (the token's Read-only everywhere switch, or a Viewer sign-in) are the gates that matter. OpenCode checks MCP tools against its permission rules under the prefixed name, such as xspeedhub_purge_cache, and most permissions default to allow. With no rule of yours in place, a Hub write tool runs without a prompt. Add rules to change that: "xspeedhub_*": "ask" first, then "xspeedhub_get_*": "allow" and "xspeedhub_list_*": "allow", because the last matching rule wins. A deny rule holds even under opencode --auto, which approves everything that is not denied. The Hub itself has no confirmation step, so these rules and read-only access are the gates. For read-only access, send the connection token with Read-only everywhere on, or sign in as a Viewer member.

## Prompts

- Use xSpeed Hub to list my sites and check the object cache status on shop.
- This terminal is on the server. Run redis-cli ping, ask xSpeed Hub for test_object_cache on blog, and tell me if they disagree.
- Using xSpeed Hub, turn the object cache on for shop once the test passes, and read the status back.

## Example session

```
You: With xSpeed Hub, set up Redis for shop and test first.
  → list_sites [read-only]: 4 sites; shop is shop.example.com
  → get_object_cache_status(site: shop) [read-only]: Drop-in not installed. Backend: Redis configured.
  → test_object_cache(site: shop) [read-only]: Connected. Probe value written and read back.
Agent: Redis answers from the shop server. Enable the object cache on shop?
You: Yes.
  → toggle_object_cache(site: shop, enabled: true) [changes site]: Drop-in installed. Redis active.
Agent: Done. Redis is the object cache for shop.
```

## How it works

1. **Read the current state**: get_object_cache_status reports whether the object-cache.php drop-in is installed, which backend is configured, Redis or Memcached, and its stats. It does not prove the server answers, so a clean status is not a green light.
2. **Test the connection first**: test_object_cache opens a live connection to the configured server and does a read and write probe with the settings saved on the site. A failure comes back with the server's own reason, such as a wrong password, a refused connection or a permission error. The Hub tells the agent to run this before toggle_object_cache.
3. **Fix the connection if the test fails**: get_settings reads the object-cache module, with secrets masked. update_settings changes it, for example the host or port. On a managed host that defines these values in wp-config.php, the fields are read-only and a write that tries to change one is refused with the name of the constant. For a host that wants the constants pasted, get_object_cache_status with detail set to snippet returns the wp-config.php block.
4. **Turn it on**: toggle_object_cache with enabled true makes the site test the connection again, write the connection constants into wp-config.php and install the object-cache.php drop-in. If the test fails, it stops with "Could not enable" and writes nothing. If wp-config.php is not writable, the drop-in goes in and the reply tells you to add the snippet by hand. The Hub tells the agent to briefly confirm intent first.
5. **Check it took**: The drop-in loads on the next request, so the agent reads get_object_cache_status again after a page load and runs test_object_cache once more. The status also warns when the cache connects but refuses writes, so a connected cache that stores nothing does not pass as healthy.
6. **Flush when stale data survives**: flush_object_cache empties the persistent object cache. Use it when old options, transients or query results outlive a page cache purge. It does not touch the page cache; purge_cache does that.

## Reference

| | |
| --- | --- |
| Read tools | get_object_cache_status and test_object_cache, both work on a read-only connection |
| Write tools | toggle_object_cache (enabled true or false) and flush_object_cache |
| Backends | Redis or Memcached |
| Status detail | status (default) or snippet, the wp-config.php constants block |
| What status proves | Drop-in installed, backend configured, stats. Not that the server is reachable |
| What the test proves | A live connect and a read and write probe on the saved settings, with the server's own error on failure |
| Enable does | Tests the connection, writes connection constants to wp-config.php, installs the object-cache.php drop-in |
| Disable does | Removes xSpeed's drop-in and its wp-config.php block; a drop-in owned by another plugin is left alone |
| Connection timeout | 1 second by default, set in the object-cache module |
| Settings module | object-cache, for get_settings and update_settings |
| Every site at once | None of these tools accept site: "all"; one site per call |
| Confirmation | None on the Hub; your client's prompt is the gate |

## Rules

- Test before you toggle. The Hub tells the agent to run test_object_cache first, because a cache server that does not answer slows every request while the page cache still looks healthy.
- Keep the Redis password out of the chat. get_settings masks it, but the wp-config.php snippet is built from the saved settings and can include a saved password. Set secrets in wp-config.php or in the xSpeed panel.
- toggle_object_cache and flush_object_cache are write tools. The Hub tells the agent to briefly confirm intent for the object-cache toggles, but that is guidance, not a lock. Your client's approval prompt and a read-only grant are the gates that matter. A read-only grant means the connection token with Read-only everywhere on, or a Viewer member's sign-in; an OAuth sign-in gets the scopes the client asks for, which are read and write by default.
- If another plugin owns the object-cache.php drop-in, turn its object cache off in that plugin. xSpeed leaves a drop-in it did not install in place when you disable.
- A flush clears cached data, so the next requests rebuild it from the database and the site is briefly slower. Flush one site, then check it, before you repeat it.

## Good to know with OpenCode

OpenCode allows tools by default, so a Hub write runs without a prompt until you add a rule. Set xspeedhub_* to ask first, then allow xspeedhub_get_object_cache_status and xspeedhub_test_object_cache by name, because the last matching rule wins. The pattern xspeedhub_get_* does not cover test_object_cache. A deny rule holds even under opencode --auto. The Hub runs the write as soon as your connection permits it.

## More prompts for this job

They work in any client connected to xSpeed Hub.

- Using xSpeed Hub, is a persistent object cache running on shop, and which backend does it use?
- Use xSpeed Hub to test whether Redis is reachable from shop. Do not change anything.
- Shop is slow in wp-admin. Use xSpeed Hub to check the object cache before anything else.
- With xSpeed Hub, test Redis on shop, and if it passes, turn the object cache on.
- Ask xSpeed Hub for the wp-config.php object cache snippet for docs.
- Use xSpeed Hub to flush the object cache on blog. Old options survive a page cache purge.
- With xSpeed Hub, turn the object cache off on shop and confirm the drop-in is gone.

## Frequently asked questions

### What permission should OpenCode have for the object cache tools?

Set every tool whose name starts with xspeedhub_ to ask first, then allow the two reads by name, xspeedhub_get_object_cache_status and xspeedhub_test_object_cache, because the last matching rule wins. A deny rule suits any tool you never want an agent to run, such as the flush, and it holds even under --auto. Without rules OpenCode allows the tools by default, and the Hub has no confirmation step, so these rules are the prompt.

### Can OpenCode check Redis directly?

If the session runs on the server, it can use ordinary shell commands such as redis-cli ping. Treat the answer as a hint and let test_object_cache decide, because that tool uses the exact connection settings the plugin on the site uses.

### Why test the connection before turning the object cache on?

Because a cache server that does not answer costs time on every request while the page cache still looks fine. The Hub tells the agent to run test_object_cache first, and the site also tests the connection when you enable and refuses to continue if it fails. The probe is still worth running on its own, since it returns the server's exact reason, such as a wrong password or a refused connection.

### What happens if Redis stops answering after I enabled it?

The site keeps working. The drop-in is built never to take the site down: it falls back to WordPress's own cache for the length of the request and marks itself as degraded. A request can still wait up to the connection timeout, which is 1 second by default, so the site gets slower. xSpeed reports that state as degraded, and test_object_cache names the fault.

### Can the agent install Redis for me?

No. These tools connect xSpeed to a Redis or Memcached server that already exists and switch the object cache on or off. Getting a server is a hosting task. xSpeed uses the phpredis extension when it is there and its own built-in client when it is not.

### What is the difference between flush_object_cache and purge_cache?

flush_object_cache empties the persistent object cache and nothing else. purge_cache with type object does the same job through the purge tool, and purge_cache with type all also clears the page cache and, when connected, the Cloudflare edge. Use the flush when stale options or transients survive a page cache purge.

### Is the wp-config.php snippet safe to share?

Treat it like a secret. The snippet is built from the settings saved on the site, so it can contain the Redis password if one is saved. Paste it into wp-config.php yourself and avoid sharing it in a chat or a ticket.

## Set up Redis object cache with other agents

[Claude Code](https://xspeedcache.com/agent/claude-code/object-cache/) · [Claude](https://xspeedcache.com/agent/claude/object-cache/) · [Claude Cowork](https://xspeedcache.com/agent/claude-cowork/object-cache/) · [ChatGPT](https://xspeedcache.com/agent/chatgpt/object-cache/) · [Codex](https://xspeedcache.com/agent/codex/object-cache/) · [Cursor](https://xspeedcache.com/agent/cursor/object-cache/) · [GitHub Copilot in VS Code](https://xspeedcache.com/agent/github-copilot/object-cache/) · [Windsurf](https://xspeedcache.com/agent/windsurf/object-cache/) · [Gemini CLI](https://xspeedcache.com/agent/gemini-cli/object-cache/) · [Antigravity](https://xspeedcache.com/agent/antigravity/object-cache/) · [Zed](https://xspeedcache.com/agent/zed/object-cache/) · [Kiro](https://xspeedcache.com/agent/kiro/object-cache/) · [OpenClaw](https://xspeedcache.com/agent/openclaw/object-cache/) · [Hermes Agent](https://xspeedcache.com/agent/hermes-agent/object-cache/) · [Grok Build](https://xspeedcache.com/agent/grok-build/object-cache/) · [ChatGPT dots](https://xspeedcache.com/agent/chatgpt-dots/object-cache/) · [Grok](https://xspeedcache.com/agent/grok/object-cache/) · [Grok Bot](https://xspeedcache.com/agent/grok-bot/object-cache/) · [Muse](https://xspeedcache.com/agent/muse/object-cache/) · [Manus](https://xspeedcache.com/agent/manus/object-cache/) · [Kimi Code](https://xspeedcache.com/agent/kimi/object-cache/) · [Paperclip](https://xspeedcache.com/agent/paperclip/object-cache/) · [NanoClaw](https://xspeedcache.com/agent/nanoclaw/object-cache/)

## More with OpenCode

- [Purge the WordPress cache with OpenCode](https://xspeedcache.com/agent/opencode/purge-cache/)
- [Find out why WordPress pages are not cached with OpenCode](https://xspeedcache.com/agent/opencode/troubleshoot-cache/)
- [Scan a website for speed problems with OpenCode](https://xspeedcache.com/agent/opencode/speed-scan/)
- [Run and track PageSpeed tests with OpenCode](https://xspeedcache.com/agent/opencode/pagespeed-tests/)
- [Raise a WordPress site's PageSpeed score with OpenCode](https://xspeedcache.com/agent/opencode/optimize-site/)
- [Tune WordPress cache settings with OpenCode](https://xspeedcache.com/agent/opencode/cache-settings/)
- [Warm the WordPress cache with OpenCode](https://xspeedcache.com/agent/opencode/preload-cache/)
- [Manage Cloudflare caching with OpenCode](https://xspeedcache.com/agent/opencode/cloudflare/)
- [Manage every WordPress site at once with OpenCode](https://xspeedcache.com/agent/opencode/fleet/)

## Documentation

- How to enable Redis or Memcached: https://xspeedcache.com/docs/object-cache/
- How to enable Page Cache: https://xspeedcache.com/docs/page-cache/
- Common problems and troubleshooting: https://xspeedcache.com/docs/common-problems-and-troubleshooting/