# Set up the Redis object cache with Kiro

> Setting up a Redis object cache with Kiro means asking its agent in the editor to check a site's object cache, test the Redis connection and enable it through xSpeed Hub.

Page: https://xspeedcache.com/agent/kiro/object-cache/
Last updated: October 2026

You are in Kiro with a chat open on a WordPress project, and you want the site to keep its database query results in Redis instead of rebuilding them on every request. Type: set up Redis for shop, test first. The agent calls get_object_cache_status through xSpeed Hub and reports whether the object-cache.php drop-in is installed, which backend is configured and its stats. That read does not prove that Redis answers.

The second call is test_object_cache. The site's plugin connects to the Redis server, reads and writes a probe value and returns the server's own error if that fails: wrong password, refused connection or permission denied. A pass leads to toggle_object_cache with enabled set to true, which installs the drop-in. A fail means stop and fix the host side first. The site also tests when you enable and stops with Could not enable, so a failed test never leaves a half-installed cache.

In Kiro the detail that matters is the autoApprove list. Kiro prompts before an MCP tool unless a rule allows it, and autoApprove in the server's mcp.json entry lists tool names, so you decide per tool what runs unseen. Permission rules in permissions.yaml can match xspeedhub/test_object_cache the same way. For this job the natural list is the two reads, get_object_cache_status and test_object_cache, and nothing else. The status and test then run without a stop, and the toggle still waits for you, which is the order you want. The editor runs on your machine, so the Redis check comes from the site through the test tool.

## Set up Kiro once

### 1. Put your sites in xSpeed Hub

Sign in at app.xspeedcache.com with Google or email; the Hub is free and has no site cap. Then connect each WordPress site from its own dashboard: click Connect Hub in the xSpeed Cache top bar, then Connect via xSpeed Hub. Each site needs the free xSpeed Cache plugin.

### 2. Add xSpeed Hub to mcp.json

Open the command palette and run Kiro: Open user MCP config (JSON), then add this entry. The user file applies in every workspace. A project can carry its own .kiro/settings/mcp.json instead, but Kiro does not load a workspace's MCP config until you trust that workspace. Kiro reconnects servers when you save the file.

File: `~/.kiro/settings/mcp.json`

```json
{
  "mcpServers": {
    "xspeedhub": {
      "url": "https://app.xspeedcache.com/xspeed/mcp"
    }
  }
}
```

### 3. Approve access in the browser

After you save, Kiro opens the xSpeed Hub authorization page. It registers itself through dynamic client registration, so there is no client ID to create. Sign in to the Hub, approve, and check the MCP servers tab in the Kiro panel for a connected xspeedhub. There is no token to paste; Kiro keeps the credentials it receives.

Full setup: https://xspeedcache.com/agent/kiro/

### Before you send a prompt that changes something

Reads change nothing on your sites, though contact_support emails xSpeed support. Writes run once your connection allows them, so your client's approval prompt and a read-only connection (the token's Read-only everywhere switch, or a Viewer sign-in) are the gates that matter. Kiro prompts before it runs an MCP tool unless a rule allows it. Rules live in two places: autoApprove in the server's mcp.json entry, which lists tool names, and mcp rules in permissions.yaml, such as a match of xspeedhub/get_* with effect allow. Allow the reads and keep purge_cache, update_settings, toggle_cache and the other write tools off both lists, because the Hub itself runs a write as soon as your connection allows it. Putting "*" in autoApprove skips the prompt for every Hub tool, writes included. In a workspace you have not trusted, Kiro asks before every MCP call even when autoApprove lists the tool.

## Prompts

- Use xSpeed Hub to check the object cache on shop and test Redis. Show me both results, then ask before enabling.
- Ask xSpeed Hub whether Redis on blog answers, and if it does not, what the error says.
- With xSpeed Hub, enable the object cache on shop once the test passes, and read the status back.

## Example session

```
You: Use xSpeed Hub to set up Redis on shop, test first.
  → get_object_cache_status(site: shop) [read-only]: Drop-in not installed. Backend: Redis configured.
  → test_object_cache(site: shop) [read-only]: Connected. Probe value written and read back.
Agent: Redis answers. Enable the object cache on shop?
You: Yes.
  → toggle_object_cache(site: shop, enabled: true) [changes site]: Drop-in installed. Redis active.
Agent: Redis is on for shop.
```

## How it works

1. **Read the current state**: get_object_cache_status reports whether the object-cache.php drop-in is installed, which backend is configured, Redis or Memcached, and its stats. It does not prove the server answers, so a clean status is not a green light.
2. **Test the connection first**: test_object_cache opens a live connection to the configured server and does a read and write probe with the settings saved on the site. A failure comes back with the server's own reason, such as a wrong password, a refused connection or a permission error. The Hub tells the agent to run this before toggle_object_cache.
3. **Fix the connection if the test fails**: get_settings reads the object-cache module, with secrets masked. update_settings changes it, for example the host or port. On a managed host that defines these values in wp-config.php, the fields are read-only and a write that tries to change one is refused with the name of the constant. For a host that wants the constants pasted, get_object_cache_status with detail set to snippet returns the wp-config.php block.
4. **Turn it on**: toggle_object_cache with enabled true makes the site test the connection again, write the connection constants into wp-config.php and install the object-cache.php drop-in. If the test fails, it stops with "Could not enable" and writes nothing. If wp-config.php is not writable, the drop-in goes in and the reply tells you to add the snippet by hand. The Hub tells the agent to briefly confirm intent first.
5. **Check it took**: The drop-in loads on the next request, so the agent reads get_object_cache_status again after a page load and runs test_object_cache once more. The status also warns when the cache connects but refuses writes, so a connected cache that stores nothing does not pass as healthy.
6. **Flush when stale data survives**: flush_object_cache empties the persistent object cache. Use it when old options, transients or query results outlive a page cache purge. It does not touch the page cache; purge_cache does that.

## Reference

| | |
| --- | --- |
| Read tools | get_object_cache_status and test_object_cache, both work on a read-only connection |
| Write tools | toggle_object_cache (enabled true or false) and flush_object_cache |
| Backends | Redis or Memcached |
| Status detail | status (default) or snippet, the wp-config.php constants block |
| What status proves | Drop-in installed, backend configured, stats. Not that the server is reachable |
| What the test proves | A live connect and a read and write probe on the saved settings, with the server's own error on failure |
| Enable does | Tests the connection, writes connection constants to wp-config.php, installs the object-cache.php drop-in |
| Disable does | Removes xSpeed's drop-in and its wp-config.php block; a drop-in owned by another plugin is left alone |
| Connection timeout | 1 second by default, set in the object-cache module |
| Settings module | object-cache, for get_settings and update_settings |
| Every site at once | None of these tools accept site: "all"; one site per call |
| Confirmation | None on the Hub; your client's prompt is the gate |

## Rules

- Test before you toggle. The Hub tells the agent to run test_object_cache first, because a cache server that does not answer slows every request while the page cache still looks healthy.
- Keep the Redis password out of the chat. get_settings masks it, but the wp-config.php snippet is built from the saved settings and can include a saved password. Set secrets in wp-config.php or in the xSpeed panel.
- toggle_object_cache and flush_object_cache are write tools. The Hub tells the agent to briefly confirm intent for the object-cache toggles, but that is guidance, not a lock. Your client's approval prompt and a read-only grant are the gates that matter. A read-only grant means the connection token with Read-only everywhere on, or a Viewer member's sign-in; an OAuth sign-in gets the scopes the client asks for, which are read and write by default.
- If another plugin owns the object-cache.php drop-in, turn its object cache off in that plugin. xSpeed leaves a drop-in it did not install in place when you disable.
- A flush clears cached data, so the next requests rebuild it from the database and the site is briefly slower. Flush one site, then check it, before you repeat it.

## Good to know with Kiro

Be careful with autoApprove. Listing only get_object_cache_status and test_object_cache means those run silently and the toggle still prompts. Listing toggle_object_cache or flush_object_cache removes the one prompt before a write, and the Hub adds none. An asterisk in autoApprove skips the prompt for every Hub tool, writes included. In a workspace you have not trusted, Kiro asks before every MCP call even when autoApprove lists the tool.

## More prompts for this job

They work in any client connected to xSpeed Hub.

- Using xSpeed Hub, is a persistent object cache running on shop, and which backend does it use?
- Use xSpeed Hub to test whether Redis is reachable from shop. Do not change anything.
- Shop is slow in wp-admin. Use xSpeed Hub to check the object cache before anything else.
- With xSpeed Hub, test Redis on shop, and if it passes, turn the object cache on.
- Ask xSpeed Hub for the wp-config.php object cache snippet for docs.
- Use xSpeed Hub to flush the object cache on blog. Old options survive a page cache purge.
- With xSpeed Hub, turn the object cache off on shop and confirm the drop-in is gone.

## Frequently asked questions

### Which xSpeed tools are reasonable to auto-approve in Kiro?

The two reads for this job, get_object_cache_status and test_object_cache. They change nothing. Keep toggle_object_cache and flush_object_cache out of the list, because the Hub runs a write as soon as your connection allows writes.

### Why test before enabling in Kiro?

Because the status call only reports the drop-in and the configured backend. It does not prove Redis answers. The test_object_cache tool makes the site connect and read and write a probe value, and the site tests again when you enable, stopping with Could not enable if it fails.

### Why test the connection before turning the object cache on?

Because a cache server that does not answer costs time on every request while the page cache still looks fine. The Hub tells the agent to run test_object_cache first, and the site also tests the connection when you enable and refuses to continue if it fails. The probe is still worth running on its own, since it returns the server's exact reason, such as a wrong password or a refused connection.

### What happens if Redis stops answering after I enabled it?

The site keeps working. The drop-in is built never to take the site down: it falls back to WordPress's own cache for the length of the request and marks itself as degraded. A request can still wait up to the connection timeout, which is 1 second by default, so the site gets slower. xSpeed reports that state as degraded, and test_object_cache names the fault.

### Can the agent install Redis for me?

No. These tools connect xSpeed to a Redis or Memcached server that already exists and switch the object cache on or off. Getting a server is a hosting task. xSpeed uses the phpredis extension when it is there and its own built-in client when it is not.

### What is the difference between flush_object_cache and purge_cache?

flush_object_cache empties the persistent object cache and nothing else. purge_cache with type object does the same job through the purge tool, and purge_cache with type all also clears the page cache and, when connected, the Cloudflare edge. Use the flush when stale options or transients survive a page cache purge.

### Is the wp-config.php snippet safe to share?

Treat it like a secret. The snippet is built from the settings saved on the site, so it can contain the Redis password if one is saved. Paste it into wp-config.php yourself and avoid sharing it in a chat or a ticket.

## Set up Redis object cache with other agents

[Claude Code](https://xspeedcache.com/agent/claude-code/object-cache/) · [Claude](https://xspeedcache.com/agent/claude/object-cache/) · [Claude Cowork](https://xspeedcache.com/agent/claude-cowork/object-cache/) · [ChatGPT](https://xspeedcache.com/agent/chatgpt/object-cache/) · [Codex](https://xspeedcache.com/agent/codex/object-cache/) · [Cursor](https://xspeedcache.com/agent/cursor/object-cache/) · [GitHub Copilot in VS Code](https://xspeedcache.com/agent/github-copilot/object-cache/) · [Windsurf](https://xspeedcache.com/agent/windsurf/object-cache/) · [Gemini CLI](https://xspeedcache.com/agent/gemini-cli/object-cache/) · [Antigravity](https://xspeedcache.com/agent/antigravity/object-cache/) · [Zed](https://xspeedcache.com/agent/zed/object-cache/) · [OpenCode](https://xspeedcache.com/agent/opencode/object-cache/) · [OpenClaw](https://xspeedcache.com/agent/openclaw/object-cache/) · [Hermes Agent](https://xspeedcache.com/agent/hermes-agent/object-cache/) · [Grok Build](https://xspeedcache.com/agent/grok-build/object-cache/) · [ChatGPT dots](https://xspeedcache.com/agent/chatgpt-dots/object-cache/) · [Grok](https://xspeedcache.com/agent/grok/object-cache/) · [Grok Bot](https://xspeedcache.com/agent/grok-bot/object-cache/) · [Muse](https://xspeedcache.com/agent/muse/object-cache/) · [Manus](https://xspeedcache.com/agent/manus/object-cache/) · [Kimi Code](https://xspeedcache.com/agent/kimi/object-cache/) · [Paperclip](https://xspeedcache.com/agent/paperclip/object-cache/) · [NanoClaw](https://xspeedcache.com/agent/nanoclaw/object-cache/)

## More with Kiro

- [Purge the WordPress cache with Kiro](https://xspeedcache.com/agent/kiro/purge-cache/)
- [Find out why WordPress pages are not cached with Kiro](https://xspeedcache.com/agent/kiro/troubleshoot-cache/)
- [Scan a website for speed problems with Kiro](https://xspeedcache.com/agent/kiro/speed-scan/)
- [Run and track PageSpeed tests with Kiro](https://xspeedcache.com/agent/kiro/pagespeed-tests/)
- [Raise a WordPress site's PageSpeed score with Kiro](https://xspeedcache.com/agent/kiro/optimize-site/)
- [Tune WordPress cache settings with Kiro](https://xspeedcache.com/agent/kiro/cache-settings/)
- [Warm the WordPress cache with Kiro](https://xspeedcache.com/agent/kiro/preload-cache/)
- [Manage Cloudflare caching with Kiro](https://xspeedcache.com/agent/kiro/cloudflare/)
- [Manage every WordPress site at once with Kiro](https://xspeedcache.com/agent/kiro/fleet/)

## Documentation

- How to enable Redis or Memcached: https://xspeedcache.com/docs/object-cache/
- How to enable Page Cache: https://xspeedcache.com/docs/page-cache/
- Common problems and troubleshooting: https://xspeedcache.com/docs/common-problems-and-troubleshooting/